2024 John Deere TerrainCut™ Rough 9009A

Information

2024 John Deere TerrainCut™ Rough 9009A

Rough Mower

Five, 27-in. independent rotary decks with a 9-foot cutting width

Deep shell deck design with exclusive rear discharge chute

No-tool notch system for easy height-of-cut adjustments

LoadMatch™ for excellent climbing and cut quality

Features may include:

  • Stamped rotary decks and rigid frame construction to maximize deck durability
  • Rear-discharge design provides premium cut quality and dispersal for less clumping and blowing for cleanup
  • eHydro™ hydrostatic pump and large-capacity wheel motors for serious hill-climbing capabilities and lower maintenance
  • No-tool notch adjustment system makes height-of-cut (HOC) changes a breeze
  • Standard GRIP all-wheel drive traction system provides superior traction by reducing wheel slip

Photos

Highlights

  • Petrolia, Ontario
  • 2024
  • John Deere
  • TerrainCut™ Rough 9009A
  • Diesel up to B20 compliant
  • Available
  • Mowing position: 2.74 m; 17.15 cm overlap between front and rear decks 9 Feet; (108 in); (6.75 in). overlap between front and rear decks
  • Of cut: Construction single sheet 10-gauge steel stamped deck with front skid plate 1.5 inch (38mm) tall and ½ inch (12.7mm) thick steel stock welded to the decks edge 1.91 to 10.2 cm; no tool adjustment (.75 - 4 in); no tool adjustment

Specifications

  • 2024
  • John Deere
  • TerrainCut™ Rough
  • 9009A
  • Rough Mowers
  • 2-stage dry element
  • Liquid centrifugal pump; forward machine location for optimum cooling
  • Four
  • 2.091 L (127.6 cu in.)
  • Direct Inject Turbocharged
  • Maximum rated At 2800 rpm ISOC: 41.1 kW (55.1 hp)
  • Tier 4
  • Key Switch on Command Arm
  • 25% load: 3.63 Liters per hour (.96 GPH) | 40% Load: 5.64 Liters per hour (1.49 GPH) | 50% Load: 6.85 liters per hour (1.81 GPH)
  • Diesel up to B20 compliant
  • Electric Switch on Command Arm for quick and easy transition from mow to transport
  • Hydraulic power with dual rod, double acting steering cylinder | Tilt: Left Foot operated for easy adjustment
  • No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display
  • Traction: eHydro servo controlled hydraulic traction pump provides flow to All-wheel-drive GRIP system; GRIP traction provides hydraulic flow between front and opposite rear wheel for increased traction to reduce 'high side tire slippage
  • Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
  • Electric Switch on Command Arm for Internal Wet Disk Brakes
  • Drive tires: 26.5x14-12 6PR Ultra Trac
  • Steering tires: 20x12-10 4PR Turf
  • 82.7-124 kPa (12 - 18 psi)
  • Forward/reverse: 2-pedal
  • Mowing: 0 - 12.8 km/h (0 - 8 mph) | Transport: 0 - 20.12 km/h (0 - 12.5 mph) | Reverse: 0 - 6.4 km/h (0 - 5 mph) | Ground speed: 0-12.8 km/h (0-8 mph)
  • Frequency of clip (FOC Reels) or Blade tip (decks): 409 m (16,097 fpm)
  • Operator ear full engine: 90 dBA
  • Tandem gear pump
  • Work lights: 3 standard work lights in front
  • Rollers Rear: 7.62 cm (3 in.) | Front: 12.70 cm (5 in.)
  • Of cut: Construction single sheet 10-gauge steel stamped deck with front skid plate 1.5 inch (38mm) tall and ½ inch (12.7mm) thick steel stock welded to the decks edge 1.91 to 10.2 cm; no tool adjustment (.75 - 4 in); no tool adjustment
  • 3393 mm (134 in.)
  • 2220 mm (87.4 in.)
  • Mowing position: 2.74 m; 17.15 cm overlap between front and rear decks 9 Feet; (108 in); (6.75 in). overlap between front and rear decks
  • 1750 mm (68.9 in)
  • 68.58 cm (27 in.)
  • 2287 mm @ 101.60 mm height of cut (90 in) @ (4 in) height of cut
  • System: 45.4 L (12 U.S. gal.)
  • 60.6 L (16 U.S. gal.)
  • Cutting units lowered: 1814.37 kg (4000 lb) with decks up
  • Cutting units drive: Direct-coupled hydraulic gear motor | Storage: Operator storage located on left side for easy access from operator seat
  • 5
  • Mower: One-touch single handle
  • Air Ride Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
  • Two-year limited